Sign Letters / Wooden Letters / Plastic Letters / Metal Letters

View Cart
Customer Service | Site Map

Search:

Instructions for using Stick-It Web Spray Adhesive

1) Make light pencil markings on the wall or the backboard of the profile (or part of the profile) of the letters you will be mounting.

2) Turn the lettering over with the back side facing upward.

3) If you letters are wide enough to avoid overspray on the edges, spray a generous amount directly onto the back of the letters. With wide letters were there is a lot of surface area, you should not have to apply the adhesive over the entire back surface. If your letter style is thin, such as the Curlz font, you will want to spray the Stick-It spray in a ball on a scratch piece of paper and then transfer the adhesive to the backside of the letter with a disposable brush or swab. Depending on the size of your letters, use a cotton swab or a disposable brush to apply the adhesive to the back side of the first letter. You should have approximately 1/10 inch or more of the adhesive after it has foamed up in order to get proper adhesion. Try to avoid getting the adhesive too close to the edge of the lettering to avoid it from being pressed out when mounting the letter.

4) Let adhesive sit for at least 2-3 minutes before applying to wall or backboard. (The instructions on the can indicate 1 minute but we have found that a longer wait time helps the adhesive become more tacky.)

5) Carefully, but firmly apply the lettering to the wall or backboard you are mounting to. The lettering should almost instantly stick if you have allowed the adhesive to sit as explained in step four. (The wider the lettering, the quicker the lettering will stick due to the larger surface area.)

6) If you need to remove the lettering immediately, or later, start by pulling one of the edges of the letter slowly away from the surface it was mounted to, allowing time for the adhesive to release. The adhesive will always stay flexible and rubber like. You can remove the Stick-It residue from the paint on the wall with Goof Off or another similar product.

Please feel free to contact us with any questions and best of luck with your project!

Note: We have not found any retailer that sales this product cheaper than we do. Nevertheless, you if do end up purchasing this product elsewhere, make sure you purchase the one with the black cap (as shown above) instead of the one with the yellow cap that is put out by the same company. the yellow cap product is not nearly as tacky and will not work well for hanging lettering.

*Note: We cannot ship this international/Canada or to APO addresses.

Call Toll-Free: 1-800-705-4020 • Mon-Fri 7:00am-8:00pm MST